Fantic Motor TZ 125 2011, User Manual

Page: 18 / 72

18
CAUTION
If high water pressure is used the radiator fi ns could be damaged and impair
the radiator e ff ectiveness.
Do not obstruct or de fl ect air fl ow through the radiator by installing unau-
thorized accessories. Any interference with the radiator air fl ow can lead to
engine overheating and damage.
Coolant information
To protect the cooling system aluminum parts (engine and radiator) from rust
and corrosion, the use of corrosion and rust inhibitors chemicals in the cool-
ant is essential. If rust inhibitors were not used, over a period of time the radia-
tor will be corroded. This will clog the tubes of the cooling system.
CAUTION
Use of incorrect coolant solutions will cause engine and cooling system
damage.
Use coolant containing corrosion inhibitors made speci fi cally for aluminum
engines and radiators in accordance with the instructions of the manufac-
turer.
CAUTION
Chemical liquids are harmful to the human body. Follow manufacturer in-
structions.
CAUTION
Distilled water must be used with corrosion inhibitors and the antifreeze in
the cooling system. If tap water is used in the system, the cooling tubes can
be clogged and reduce the cooling system e ffi ciency.
If the lowest ambient temperature encountered falls below the freezing point
of water, protect the cooling system. Use a permanent type of antifreeze in
the cooling system (distilled water and ethylene glycol and corrossion inhibi-
tors for aluminium engines and radiators).
For the coolant mixture ratio under extreme conditions, choose the mixture
ratio listed on the container for the lowest ambient temperature.
CAUTION
Permantent types of antifreeze have anticorrosion and anti-rust properties.
When it is diluted excessively, it loses its antifreeze and anticorrosion prop-
erties. Mix in accordance with the instructions of manufacturer.
Liquid recommended
Permanent type of antifreeze (distilled water and ethylene glycol) plus cor-
rossion inhibitors for aluminium engines and radiators. (see table lubricants
pag. 70)
NOTE
Initially, at the factory a permanent type of antifreeze is installed in the
cooling system. It is colored green, it contains a 50% solution of ethylene
glycol, and has a freezing point of –35 ºC.
Coolant recommended
Coolant absorbs excessive heat from the engine and transfers it to the air at
the radiator. If the coolant level is low, the engine overheats and may su ff er se-
vere damage. Check the coolant level each day before riding the motorcycle.
Add liquid recommended if the level is low.