Fantic Motor TZ 125 2011, User Manual

Page: 36 / 72

36
Compression adjustment
HIGH:
Use a screwdriver for adjustments.
As the control is closed the compression will be harder, on the other hand as
it is opened it will be softer. Normally, the standard measurement would be 6
clicks SACHS / 1,5 turns ÖHLINS from the completely closed position.
LOW:
Standard 7 clicks SACHS / 16 clicks ÖHLINS.
(A) - High compression adjustment.
(B) - Low compression adjustment.
Spring adjustment
- Remove the seat and side covers.
- Loosen the air cleaner duct clamp screw.
- Remove the mu ffl er.
- Remove the subframe with the air cleaner box.
Suspension spring
The standard spring is 5 SACHS; 5,2 ÖHLINS.
Preload SACHS: 16 mm.
Preload ÖHLINS: 14 mm.
(C)
(A)
(B)
(A) - Nut.
(B) - Spring.
(C) - Locknut.
- Tighten the locknut securely.
- After adjustment, move the spring up and down to make sure that the
spring is fully seated.
- Install the parts removed.
Rear shock absorber spring replacement
Harder and softer springs are available. If the standard spring is not adequate
for your purpose, select a proper one according to the rider´s weight and the
road conditions.
- Using the harder spring:The rebound is quicker.
- Using the softer spring:The rebound is slower.
NOTE
Refer to the suspension adjustments on page 46.