25
DRIVE CHAIN GUIDE
The drive chain must be checked, adjusted, and lubricated in accordance with
the Maintenance Schedule. If the chain is worn or adjusted incorrectly (either
too loose or too tight) the chain could become loose or break. Replace the
chain, if necessary.
WARNING
A chain that breaks or becomes loose could snag on the engine or on the
rear wheel, severely damaging the motorcycle and causing it to go out of
control.
Drive Chain Slack Inspection
The space between the chain and the swingarm at the same height of the
chain slider should be 30-50 mm. Rotate the rear wheel to
fi
nd the place
where the chain is tighter. Adjust the drive chain if it has too much or too
little slack.
30-50 mm.
In addition to checking the slack, rotate the rear wheel to inspect for dam-
aged rollers, loose pin and links, unevenly or excessively worn teet, and dam-
aged teeth.
Summary of Contents for TZ 125 2011
