27
Chain Guide Slider
Visually inspect the upper and lower chain slider at the location of the swin-
garm. If damaged or worn, replace it with a new part.
(A) (B)
(A) - Chain Guide Slider.
(B) - Swingarm.
Pinion Teeth, Pinion Sprocket and Sprocket Wear
Visually inspect the pinion teeth. If they are worn or damaged, replace the the
pinion or the sprocket.
Lubrication
Lubrication is necessary after riding through rain or in the mud, or any time
that the chain appears dry. A heavy oil is preferred to a lighter ol because it
will stay on the chain longer and provide better lubrication.
Apply oil to the sides of the chain rollers for better oil penetration. Wipe o
ff
any excess oil.
(A) - Apply oil
Use oil for
fi
nal drives
(see table lubricants pag. 70).
HANDLEBAR
To suit various riding positions, the handlebar position can be adjusted front
to rear.
Handlebar position adjustment
Loosen the handlebar holder (A) screws (B), turn the handlebar and place it in
the desired position.
(A)
(B)
Summary of Contents for TZ 125 2011
