
25
WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have finished.
Lift the element out carefully, disconnecting the leads
from the element terminals (noting their position). If it
is not possible to disconnect the leads in this way, pull
the cooker forward to gain access to the rear, remove
the screws securing the electric cover to the back sheet,
remove the cover and disconnect the terminals from the
rear.
Fit the new element and reassemble in reverse order.
Check the operation of the grill.
22. To Change Oven Light Bulb.
Disconnect from electricity supply.
Make sure the oven is cool. Open the oven door and
remove the oven shelves. Remove the grill pan and
support from the grill chamber.
Unscrew the bulb cover by turning anticlockwise. It may
be very stiff.
Taking care to protect your fingers in case the bulb should
shatter, unscrew the old bulb.
Fit an Edison screw fitting 15w 240v lamp, FOR OVENS. It
must be a special bulb, heat resistant to 300°C.
Screw in the new bulb, screw back the bulb cover. Turn on
the electricity supply and check that the bulb now lights
Summary of Contents for Excel
Page 26: ...26 Circuit Diagram Ovens ...
Page 61: ... ...