
15
Glide-out Grill
The grill pan and grid should be washed in hot soapy
water. After grilling meats or any foods that soil, leave to
soak for a few minutes immediately after use. Stubborn
particles may be removed from the grid using a nylon
brush. Alternatively, the grill pan can be washed in a dish
washer.
Before you remove any of the grill parts for cleaning,
ensure that they are cool, or use oven gloves.
The grill pan can be easily removed for cleaning, as
follows:
Remove the grill pan support frame by pulling the grill
pan forward:
Lift the grill pan clear of the support frame.
The support
frame is held to the side rails by two clips on each side:
For each side, support the side rail with one hand and
with the other hand lift the frame up and out of the side
clips:
For safety's sake, push the side rails back into the grill
chamber.
If you need to remove the side rails to facilitate the
cleaning of the grill chamber, you can unhook them from
the grill chamber sides and wipe the sides clean with a
soft cloth and mild detergent.
Do not
use any abrasive substances.
DO NOT put the side runners in a dishwasher.
Once you have finished, hook the side rails back onto the
sides of the chamber. To refit the frame, pull the side rails
forward and, for each side in turn, support the side rail
and press the frame down into the side rails. Replace the
grill pan.
When refitting the grill pan, ensure that the wide rim is at
the front:
Control Panel, Slow Oven, Grill
Chamber and Doors
Avoid using any abrasive cleaners, including cream
cleaners. For best results, use a liquid detergent or our
Multi-purpose Cleaner. Alternatively, use a soft cloth
wrung out in clean hot soapy water. After cleaning, polish
with a dry cloth.
We do supply a specialist Fascia Cleaner for the control
panel.
Left and Right Hand Ovens
The oven door front panels can be taken off so that the
glass panels can be cleaned. Move the cooker forward
to gain access to the sides (see the ‘Moving the Cooker’
section under 'Installation').
Door Panel
Open the oven door slightly and remove the front panel
fixing screws from the door sides (two each side):
Summary of Contents for Excel
Page 26: ...26 Circuit Diagram Ovens ...
Page 61: ... ...