Fairford Electronics QFE Series, Manual

Page: 168 / 194

page 5-57
Programming
QFE
FD8420 issue02_F
7. Press the or buttons until
52 Parameter
is displayed on the bottom line of the
display.
8. Press the
Enter
button once to apply the change. The display will flash once to confirm
the change has been accepted.
9. Press
#
once to return to
Map From
.
10. With
Map From
on the top line of the display press the button once so that
Bit
Number
is displayed on the top line.
11. Press
Enter
once to select
Bit Number
.
12. With the cursor on the LSB, Press the button once to change the bit state to zero (0).
13. Press the
Optimise
button until the cursor is displayed on bit five .
14. Press the button once to change the bit state to one (1).
15. Press
Enter
once to accept the change.
16. Press
#
four times to return to
Stopped and Ready
.
Please remember to keep the above settings they must be permanently saved. See section
5.4.5
10
9
11 12 13 14
15
16
7
#
x 43
8
#
x 1