Fairford Electronics QFE Series, Manual

Page: 107 / 194

FD8416 5MC Parameters
03 September 2003
55
55 55
55
Software .
11
11 11
11
112 STATUS 4 0 255 0 flags Read Only
More useful control flags
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
113 drive type 0 255 0 none Read Only
Unused
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
114 Soft Switch Off 0 5 0 none Read/Write
Sytem Variable
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
115 selected app 0 9 0 none Read/Write
Value selected from application table. Not implimented on
some versions of software.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
116 5mc inhibit time 0 63.75 0 Minutes Read/Write
time for which the unit is not allowed to restart. Mainly for
larger stacks to avoid destroying thyristors during
commisioning.
Value depends on Unit size.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
0.25
Std
117 command source 0 3 0 none Read/Write
Unused
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
118
Motor Rated Current 0 32 16 Amps Read/Write
Motor Rated Current used when motor current is lower than
starter rated current 50-100% of softstart rating used in
application setups
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
119
default pnu to display 26 125 0 none Read/Write
Unused
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
120 STATUS 5 0 255 0 flags Read Only
Yet more status flags
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
Page 16 of 17