Fairford Electronics QFE Series, Manual

Page: 116 / 194

page 5-5
Programming
QFE
FD8420 issue02_F
5 Programming
5.1 Versions
This manual applies to the following versions of software;
5MC software version: 5MC V 55.11
Keypad software version: V1.063
Menu software version:Menu V1.017
5.1.1 Useful Information
Further useful information can be found in the following documents which are available on
the website, http://www.fairford.co.uk;
The Basic Guide to the Installation and Operation of the QFE Soft Starter
QFE Mechanical Installation Manual
QFE Electrical Installation Manual
QFE Applications Manual
QFE Electro-Magnetic Compatibility Manual
QFE Modbus Manual
5MC Parameter Listing
5MC Bit Parameters
Applications Data Listing
5.1.2 Conventions
The following typographical conventions are used in this manual;
1. Characters that are quoted directly from the QFE’s display are quoted in a fixed
width font.
This includes menu names:
Basic
parameter names:
Start Time
parameter values:
5 Seconds
status information:
Stopped and ready
2. Buttons on the keypad/keypod to be pressed by the user will be indicated by their
name,
Enter
, in
bold fixed width font
, or by the appropriate symbol; thus also
in bold , for the decrement or move down button.
3. Where “QFE+”, or “applies to plus units only” is shown in the text it indicates that the
functionality described by that section applies to QFE+ units only, and not the standard QFE
unit.
5.1.3 Quick Start
Once the unit is wired as per instructions in the Basic Guide or the Electrical Installation
manual, then simply select a suitable application from the
Applications
menu (see section
5.4.3 ), and the unit can then be started with the keypad. This will give a good basic setup,
but in some instances fine tuning will be required.