Fairford Electronics QFE Series, Manual

Page: 108 / 194

FD8416 5MC Parameters
03 September 2003
55
55 55
55
Software .
11
11 11
11
121 USER_FLAGS4 0 255 1 flags Read/Write
Yet more control flags
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
122 ss_smoothing 5 15 1 none Read/Write
Arbitrary filter to smooth soft stop jitters caused by unstable
load.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
123 Temp/Alt Derate 0 50 0 % Read/Write
Reduce certain parameters (current limit etc.) by this % for
high temperature or altitude, Set derate then load an
application, this would then be derated. The derate is only applied as an application
is loaded.
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
124 OffLineCommand 0 255 0 none Read/Write W
Certain system functions are carried out by writing to this
register. See the command table 1=Disable 2=Enable 3=BusStarting
4=RemoteStaring 5=ResetStarter
6=ResetTrip 7= BusStart 8= BusStop
9=Load Eerom From Defaults 10= Load
Ram From Eerom 11= Save Ram to Eerom
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
125
Bus BaudRate 0 255 0 none Read/Write
0 = 9600 baud non zero = 15625 baud Only Active With certain Comms Options
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
126
Bus Action on Fail 0 255 0 none Read/Write
Action following a bus failure 0= no trip 1 = trip Only Active With certain Comms Options
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
127 Hidden Trip Flags 0 255 0 flags Read/Write
Enable / disable certain trips This Parameter is really for diagnostic
purposes only!
Description Hints
PN Parameter Name Default Max Min Units Type Scaling
1
Std
Page 17 of 17