Fairford Electronics QFE Series, Manual

Page: 115 / 194

Programming
page 5-4
QFE
FD8420 issue02_F
5.5.4 Selecting Optimising with Programmable Input 1. .............................. 5-50
5.5.5 Selecting a ‘Kick’ Start with Programmable Input 3,
(applies to plus units only). ................................................................. 5-52
5.5.6 Selecting a Parameter Group with Programmable Input 2,
(applies to plus units only). ................................................................. 5-54
5.5.7 Using the K3 relay to indicate the Main Contactor status,
(applies to plus units only). ................................................................. 5-56
5.5.8 Using the 4-20mA input to monitor a level,
(applies to plus units only). ................................................................. 5-58
5.5.9 Using the DC input to set a parameter’s value,
(applies to plus units only). ................................................................. 5-61
5.5.10 Mapping the Load Current to Analogue Output 2,
(applies to plus units only). ................................................................. 5-62
5.5.11 Mapping Programmable Input 2 to the User Trip,
(applies to plus units only). ................................................................. 5-63
5.6.1 Definitions ........................................................................................... 5-65