![background image](http://html1.mh-extra.com/html/fair/h18/h18_maintenance-and-user-manual_3196761020.webp)
Use buttons 1 or 2 to select the access key.
Stand-by mode
It is possible to configure the stand-by in three different ways. These are selected via the technical menu
M8 under the entry ‘various calibrations’ (05) where the ‘stand-by way’ is at parameter 13.
Then you just have to choose between the values 1, 2 or 3 depending on preference.
-
Mode 1: only with respect to water temperature
Switch on the stove once the water temperature has been set (for example 65°C). When the water
temperature approaches the set degrees, the stove will enter modulation mode, and when it exceeds
the values, it will enter stand-by mode.
When the water temperature falls below the set threshold, the stove will restart and return to work or it
will switch back on if the stand-by is active
With this mode, the stove does not take into account in any way the ambient temperature detected by
the stove itself. The water has priority.
-
Mode 2: with respect to the thermostat
Switch on the stove once the water temperature has been set (for example 65°C). When the water
temperature approaches the set degrees, it will enter modulation mode and will remain in this stage
until the set temperature in the room thermostat is reached (for example 22°C). Only then will it enter
stand-by mode.
When the room temperature indicated in the thermostat falls below the set threshold, the stove will
restart and return to work or will switch back on if the stand-by is active.
With this mode, the stove does not take into account in any way the temperature detected by the stove
itself. The thermostat has priority.
-
Mode 3: with respect to the room probe
Switch on the stove once the water temperature has been set (for example 65°C). When the water
temperature approaches the set degrees, it will enter modulation mode and will remain in this stage
until the displayed set temperature is reached (for example 22°C). Only then will it enter stand-by mode.
When the room temperature indicated in the display falls below the set threshold, the stove will restart
and return to work or it will switch back on if the stand-by is active
With this mode, the stove does not take into account in any way the water temperature. The room probe
has priority.
To return to the level of the previous menu and to continue scrolling among the various entries of the
menu, press button 4 once.
To exit the menu altogether, press button 4 twice.
Start-up
To start the stove, keep button 4 pressed for about 2 seconds. The stove begins the various start-up
phases, viewing them on the display step by step.
When the stove has started successfully, it passes on to the work mode which represents the standard
functioning mode.
MENU 08
SETTINGS
TECHNIC
10:52
20.0° 35°
START
10:54
20.0° 35°
LOAD PELLET
10:56
20.0° 45°
FIRE WAIT
11:02
20.0° 55°
FLAME LIGHT
11:04
20.0° 60°
WORK 1