![background image](http://html1.mh-extra.com/html/fair/h18/h18_maintenance-and-user-manual_3196761021.webp)
The display views the present time, the temperature detected by the room probe. The power at which
the stove is operating is shown flashing below the set power, which remains fixed.
Set temperature
To set the desired room temperature press button 2 then
press button 1 or 2 to increase or decrease the
temperature value from a min. of 7°C to a max. of 40°C.
The value will be confirmed automatically.
Water temperature set
To set the desired water temperature press button 1, and
then button 1 or button 2 to increase or decrease the
temperature from a min. of 30°C to a max. of 80°C.
The value will be automatically confirmed.
Set power
To set the desired power (speed), press button 5 or 6 to
increase or decrease the power value from a min. of 1 to a
max. of 5.
The value will be confirmed automatically.
Modulating function (energy saving)
When the room temperature or the water temperature reaches the temperature
set on the stove, its power automatically goes to minimum, and therefore power
1.
This function allows to maintain the temperature reached with minimum energy and pellet consumption.
Cleaning the brazier
During normal stove operation in work mode, brazier cleaning is activated for set
time internals for a few seconds.
This maintains the stove at the best efficiency and performance.
Shutdown
To turn the stove off, keep button 3 pressed for about 2
seconds. The stove begins the various shutdown phases:
the cochlea stops immediately and the flue extractor rises
to the maximum speed.
11:30
21.0° 60°
WORK
1
22°C
SET TEMP
ROOM
11:40
22.0° 60°
WORK
1
03
SET
OUTPUT
12:20
26.0° 60°
WORK
MODULAT-
12:50
26.0° 60°
CLEANING
FIRE-POT
21:30
23.0° 60°
CLEANING
FINAL
21:30
23.0° 60°
OFF
11:30
21.0° 60°
WORK
1
65°C
SET TEMP
WATER