selection.
Mode button: Program setting (5 to choose).
Timer button: setting the time.
Temperature button: setting the temperature.
Display screen: display of operations in progress.
2. Operation:
2.1 Standby Mode:
The deep fryer will emit a single “beep” for 1s. Here the ON/OFF light
will flash and the display will show “P001”. The Mode light will also
flash.
2.2 Selecting Modes:
2.2.1
Press the “Mode” button in standby mode to make a mode
selection. The blue Mode light will flash. The display will show
“P001-P005” . Press it again and the display will show “P001” .
Note: Each mode has a matching preset time and temperature, please
check the section “Pre planned Recipe”.
2.2.2 Press the “Temp” button in standby mode. The display will show
the preset temperature and the corresponding blue temp indicator light
will turn on. Press the “Temp” button once to increase the temperature
by 5
℃
. Use the “Temp” button to adjust the temperature from 110
℃
to
190
℃
. When the temperature selection reaches 190
℃
, press the “Temp”
button again and the temperature will revert back to 110
℃
.
2.2.3
Press the “Time” button in standby mode and the display will
show the preset time and the corresponding blue time indicator light will
turn on. Press the “Time” button once to increase the time by 1min. Use
the “Time” button to adjust the time from 1(mini min) to 99(max min).
When the time selection reaches 99min, press the button again and it will
revert back to 1min.
Throughout the whole process, The digital screen will show 0.5s flash in
both the start and stop operation
2.3 Starting: preheating phase
