fadini Siti 63, Instructions Manual

Page: 29 / 48

2°
Push the Copy button: the operation phases will
immediately be displayed. Wait for the rolling
numbers from 10 to 0 to be finished before
plugging in a new Memory B.
page 25
1°
Follow the operation Memory data reading
(page 22)
3°
Copy Memory
DISPLAY
MEMORY
DISPLAY
Once the sequence has finished, the message
"Insert new Memory" will be displayed. Plug in the
new Memory B and the rolling numbers 10 to 0
will be displayed.
The Siti 63 Memory is an important element in single or multiple installations because it stores the key-codes of many transmitters. For this reason, in order
to grant security, all memories can only be copied, while the Replacing and Deleting operations are not active.
Copying a
Memory A means creating its copy Memory B together with all its stored codes, using the Birio LC Device.
This operation is possible with blank or key-encoded Memories.
If an "Error" message is displayed it means that the operation was not correctly carried out, or that the transmitter was encoded
with a key-code belonging to a different family.
DISPLAY
Memory
Reading....
Read Memory
DISPLAY
10
0
Insert new
Memory
DISPLAY
Push Button
DISPLAY
This fonction allows a transmitter to be learned by receivers in different installations, simply by loading it with its information, i.e. Copy, Replacement,
Deletion or the Common Button, as described in the above chapters.
Procedure : After carrying out the needed operation, i.e. Duplucation, Remplacement, Deletion et Copy one button, as described in the above
paragraphes, it is possible to "load" transmitter B with the information received by the Birio LC Device, by pressing the 1st button on the transmitter and
releasing it after 20 seconds (after 5 seconds the led will turn off) when the led will illuminate again. Then operate near 2nd installationr (max distance 10
metres) and push 4-5 times a button in the transmitter B until the led will illuminate.
In order to carry out the same operation on a 3rd installation, repeat the same transmitter "reloading" phase.
1°R
2°R
Power supplied
Radio
2nd installation
To "reload" the transmitter:
press for 20 seconds et
release when the led
illuminates
MEMORIA
INSERISC
I CHIAVI
TOGLI
CHIAVI
DUPLIC
A
SOSTITUISC
I CANCELL
A COPIA
UN TAS
TO
SELE
ZIONA CODICE MEMOR
IA
Birio
LC
GB
Transmitter B receives the
information
Power supplied
Radio
1st installation
Push any button on Transmitter B for 4-5
times until the led will illuminate
Push any button on Transmitter B for 4-5 times
until the led will illuminate. When the operation
is achieved, Transmitter B will have accomplished
its function.
Transmitter B
1°
Installation
2°
Installation
Transmitter B
Power supplied
Radio
3rd installation
Push any button on Transmitter B for 4-5 times
until the led will illuminate. When the operation
is achieved, Transmitter B will have accomplished
its function.
3°
Installation
Transmitter B
4°
Installation
5°
Installation
...
Repeat this operation for all the installations you need to encode.
To "reload" the
transmitter: press for 20
seconds et release
when the led illuminates
page 27
MEMORY COPYING
DIFFERENT INSTALLATIONS LEARNING
+
–
Memory B
Transmitter B
4213
DELETE
KEYS
COPY
REPLACE
DELETE
COPY
ONE BUTT
ON
MEMOR
Y
Memory A
REPLACE
DELETE
COPY ONE BUTTON
COPY
MEMORY ENTER
KEYS
DELETE
KEYS
SELECT
CODE
Siti
Siti 63
Siti 63
Siti
Siti
Siti
Siti
Siti
Siti
Siti
Siti
DELETE
KEYS
COPY
REPLACE
DELETE
COPY
ONE BUTT
ON
MEMOR
Y