page 20
3°
AERIAL
1
2
3
4
5
1°R
2°R
B
Transmitter B
This operation allows to copy one button of the transmitter, called common button for multiple users. In order to accomplish this operation a transmitter
must have at least one encoded button to be copied onto the radio receiver: for exemple if You need to copy only the 3rd button corresponding to the
3rd channel of the receiver of a Birio Transmitter with all its 4 buttons codified, it is necessary to accomplish the operation pressing only the 3rd button.
1°
Follow the operation transmitter data reading, page 14, for the transmitter A
to be copied.
NOTE: only Transmitter A code is needed to copy one button,in this way it is
possible to follow the operation as described on page 21.
Transmitter whose
common button needs
be copied
A
Push the 4th multi-function button:the functions Copy, Replace,Delete and
Copy one button are sequencely displayed. To confirm press again this 4th
button when the operation required is displayed . Then position the transmitter B
onto the Birio LC Device to learn the information to accomplish the operation.
Check the operation: remove the transmitter B and press one button, the
messages "Pulse Transmission" and "Copy one button" will be displayed as a
confirmation
Operate near the power supplied Radio Receiver (max distance 10 metres) and push one
button on the transmitter B for 4-5 times as long as the led will illuminate.
2°
DISPLAY
Copy one
transmitter button
Enter Transmitter
COPYING ONE TRANSMITTER BUTTON (COMMON BUTTON)
IMPORTANT:
If by mistake a button on the transmitter B is pushed once or more times, before the Radio Receiver learning, or the operation is not correctly
carried out,or the same operation needs to be carried out on other installations (page 27), 4 more possibilities will be given to repeat the operation, if all
the 5 possibilities are used up it is possible to reactivate them by pressing the 1st button on the Transmitter for 20 seconds (after 5 seconds the led will turn
off) , release when the Led will light again.
3°
page 18
AERIAL
1
2
3
4
5
1°R
2°R
B
Transmitter B
B
A
1°
Follow the operation transmitter data reading, page 14, for the transmitter A to
be replaced.
NOTE: only Transmitter A code is needed for the replacement,in this way it is
possible to follow the operation as described on page 21.
Transmitter A to
be replaced
A
2°
Push the 4th multi-function button:the functions Copy, Replace,Delete and Copy
one button are sequencely displayed. To confirm press again this 4th button when
the operation required is displayed . Then position the transmitter B onto the Birio
LC Device to learn the information to accomplish the operation.
Check the operation: remove transmitter B and press one button, the
messages "Pulse Transmission" and "Replace" will be displayed as a
confirmation
Operate near the power supplied Radio Receiver (max distance 10
metres) and push one button on the transmitter B for 4-5 times as long as
the led will illuminate.
The operation completed, Transmitter B has accomplished its function.
DISPLAY
Replace
Transmitter
Enter
Transmitter
TRANSMITTER REPLACING
IMPORTANT:
If by mistake a button on the transmitter B is pushed once or more times, before the Radio Receiver learning, or the operation is not correctly
carried out,or the same operation needs to be carried out on other installations (page 27), 4 more possibilities will be given to repeat the operation, if all
the 5 possibilities are used up it is possible to reactivate them by pressing the 1st button on the Transmitter for 20 seconds (after 5 seconds the led will turn
off) , release when the Led will light again.
TRANSMITTER
DISPLAY
TRANSMITTER
DISPLAY
Replacing a
transmitter A
means replacing it with a new one called
transmitter B
inside the Radio Receiver, using the Birio LC Device. When the
operation is accomplished, transmitter A will no longer be recognized by the Radio Receiver.
This operation is possible with blank or key-encoded transmitters (in this case the memory must be key-encoded too)
If an "Error" message is displayed it means that the operation was not correctly carried out, or that the transmitter is encoded with
a key-code belonging to a different family.
REPLACE
DELETE
COPY ONE BUTTON
COPY
MEMORY
ENTER
KEYS
DELETE
KEYS
SELECT
CODE
REPLACE
DELETE
COPY ONE BUTTON
COPY
MEMORY
ENTER
KEYS
DELETE
KEYS
SELECT
CODE
Siti
Siti
Summary of Contents for Siti 63
Page 1: ...GB I...
Page 2: ...NL F D E...
