Siti 63
TRANSMITTER COPYING ON THE SAME RECEIVER
4th Operation
Siti 63
4 buttons
Siti 63
2 buttons
AERIAL
1
2
3
4
5
1°R
2°R
PLUG-IN RECEIVER
EXTERNAL RECEIVER
+
24 VOLT a.c.
POWER SUPPLY 1st CHANNEL
2nd CHANNEL
3rd CHANNEL
4th CHANNEL
1 2
3 4
5 6
7 8
9 10
11 12
AERIAL
1st Operation
A
2nd Operation
Operations to be carried out in 30 seconds max time
Operations to be carried out in 30 seconds max time
3rd Operation
page 8
TO COPY NEW TRANSMITTERS OPERATING ON THE SAME RADIO RECEIVER, YOU NEED TO HAVE AN ENCODED TRANSMITTER AND TO CARRY
OUT TWO OPERATIONS SEQUENCELY. THESE OPERATIONS MUST BE EFFECTED AT A MAX DISTANCE OF 10 METRES FROM THE RADIO
RECEIVER, DULY POWER SUPPLIED, AERIAL CONNECTED
1st Operation: Push the
1st button
on the
new Radio Transmitter A
and release when the Led turns off
2nd Operation: Push the
2nd button
on the
new Radio Transmitter A
as long as the Led turns off plus 2 seconds. Then release
the button.
3rd Operation: Push the
1st button
on the encoded
Radio Transmitter B
and release when the Led turns off
4th Operation: Push the
2nd button
on the encoded
Radio Transmitter B
and release when the Led turns off
Repeat these operations for any new Transmitter required.
Push 1st button
and release
when the led
turns off
New
New
New
Push 1st button
and release when
the led turns off
Push 1st button and
release when the led
turns off
Push 1st button and
release when the led
turns off
Push 2nd button and
release when the led
turns off plus 2 seconds
Push 2ndt button and
release when the led
turns off plus 2 seconds
Push 2nd button and
release when the led
turns off
Push 2nd button
and release when
the led turns off
4th Operation
1st Operation
2nd Operation
New
3rd Operation
B
IMPORTANT
: Transmitter copying is possible even if keys are encoded (see chapter about Birio LC device) provided that they were encoded by the same
Birio LC encoding device.
B
A
A
A
B
B
EXTERNAL RADIO RECEIVER
1
2
3
4
(FREE MEMORY)
P1
LED
REMOVABLE
MEMORY
REMOVABLE
MEMORY
LED
1°R
1°R
2°R
2°R
+
24 VOLT a.c.
POWER SUPPLY
1st CHANNEL
2nd CHANNEL
3rd CHANNEL
4th CHANNEL
1 2
3 4
5 6
7 8
9 10
11 12
AERIAL
STRIP
JUMPER
1
2
(FREE MEMORY)
P1
STRIP
JUMPER
PIN
PIN
AERIAL
1
2
3
4
5
+
TO FIT INTO
CONTROL PANEL
PL
UG
-IN RADIO RECEIVER
page 6
1)Insert the removable Memory and supply the External Radio Receiver with 24 V a.c. by terminals 1(-) and 2 (+) ; plug the Radio Receiver into the control
panel.
2) Insert the
"Strip" jumper
into
P1
position -free memory reading-
3) Press
P pushbutton
on the Radio Receiver for about 5 seconds. Release the push button P and the red led will flash: every flash corresponds to 180
transmitters to store, for ex: 7 flashes mean 7x180=1260 trasmitters still to store, (180 transmitters multipied by 10 flashes is 1.800 transmitters to store)
4) Remove the
"Strip" jumper
and plug it into only one
PIN
PUSH BUTTON
P
PUSH BUTTON
P
Siti
Siti
Siti
Siti
Siti 63
RADIO TRANSMITTER MEMORY READING
Summary of Contents for Siti 63
Page 1: ...GB I...
Page 2: ...NL F D E...
