fadini Siti 63, Instructions Manual

Page: 41 / 48

COPY ONE BUTTON (COMMON BUTTON)
1°
- Turn on the Birio LC device and open the file
- Find the transmitter code inside the customer's
list and page 33 and enter it into the Find Code
window
- Click on connect to Birio LC
2°
- Position the Transmitter, whose button you need to activate, onto the Birio
LC Device
- Click on Enter to copy one button
- When the lTransmitter's led turns off, the first part of the operation is completed
3°
- To activate the transmitter, get it near the Radio Receiver (max distance 10
metres) and push only the button you need to operate as Common Button
for 5 times: when the led will turn on the transmitter is activated on the Radio
Receiver.
page 37
IMPORTANT: If by mistake a button on the transmitter B is pushed once or more times, before the data transmission to the Radio Receiver, or the operation
is not correctly carried out, 4 more possibilities will be given to repeat the operation. If the 5 possibilities are used up, it is possible to reactivate them by
pressing the 1st button on the Transmitter for 20 seconds (after 5 seconds the led will turn off) and releasing it when the Led will light again.
With this operation it is possible to copy one button of the transmitter, called Common Button, for multiple automatic gates or garage doors. Before
carrying out the operation, the transmitter needs to be encoded with at least 1 button to be copied on the Radio Receiver : for exemple if you need
to copy only the 3rd button corresponding to the 3rd channel of the receiver of a Siti 63 transmitter which has the 4 buttons codified, it is necessary to
complete the operation on the new transmitter by pushing the 3rd button.
Connect
Click
PC OPERATIONS
DISPLAY
AERIAL
1
2
3
4
5
1°R
2°R
B
Power supplied
Radio Receiver
Click
B
MEMOR
IA
INSERIS
CI CHIAVI
TOGLI
CHIAVI
DUPLICA
SOSTIT
UISCI
CANCEL
LA COPIA U
N TASTO
SELEZIO
NA CODICE MEMOR
IA
Birio
LC
B Enter to copy
one button
page 39
4213
Find
Customer
Find
Code
Entered or searched code(0,1,...F)
00 12 2F
For better managing the stored data in the "Birio Tool" programme, we suggest to print every stored file and keep them in your records.
Before printing, choose a software for opening the file for ex "Word by office"
IMPORTANT: Always remeber to fill in all data about the customer, in this way you will have all the complete information printed.
Immeuble Marinella
Mario Rossi 655A79 0001
Giulio Bianchi 0001B2 0211
Custromer's name
Birio 868
transmitter code
Activated channels to
buttons
4° 3° 2° 1°
General information
DATA PRINTING
Siti
Siti
Siti
GB