fadini Siti 63, Instructions Manual

Page: 33 / 48

Birio LC Device has its own PC software which is very helpful for customer managing. This software, called "Birio Tool" offers the possibility of memorizing and
carrying out all operations on transmitters-either blank or key-encoded by the same encoding device- even if the installer is not on the installation site.
Birio Tool software will not give any information about the precence of any key-code.
IMPORTANT : BEFORE CONNECTING YOUR PC TO THE BIRIO LC, MAKE SURE THAT THE PC HAS THE SERIAL PORT COM1, IF IT HAS THE USB PORT YOU NEED TO FORMAT
IT TO COM1
"BIRIO TOOL" SOFTWARE INSTALLATION
- Create a new file called "Birio LC Device" in the working directory of your PC to contain all the working files.
- Insert the Floppy Disk into the PC and open it, then copy all the application files inside the newly created file.
- Oper the "Birio" aplication file
- When opening the application file, a window with all the working options, will be displayed: then click on Open File and enter the name or the file of
the customer: for ex.: House , De Rossi jointly-owned building etc...
ATTENTION: Always open a new file for every installation or for every customer clicking on Open File
Use an adaptor to connect
to USB port
"BIRIO TOOL" PC SOFTWARE INSTALLATION AND USE
page 29
MEMOR
IA
INSER
ISCI
CHIAVI
TOGLI
CHIAVI
DUPLIC
A
SOSTIT
UISCI
CANCE
LLA
COPIA
UN TAS
TO
SELEZIO
NA CODICE MEMOR
IA
Birio
LC
SUPPLY
9 VOLT
ON / O
FF
2 buttons
transmitter
4 buttons
transmitter
Plug-in
Memory
Personal
Computer
Birio LC device for customized
key encodying
"Birio Tool"
Floppy Disk software
MEMORY DATA DOWNLOADING
-Connect your PC to the Birio LC device using an adaptor to USB port, turn on the Birio LC and open the "Birio Tool" file then click on "Open File" and enter
the file name
ATTENTION: if the code number is made of letters and symbols beyond the series 1,2,...A, B,...,F (ex: §, ò, ü,...) it means that the data receiving is not correct
and you need to check the connecting cables and start back to download data.
ATTENTION : After this operation it is necessary to pay attention should you need to read the Memory data on PC (with the operation Memory data downloading
on PC) because when the file is closed, all the information entered by the the user will be overwritten and thus deleted, because it is not possible to write
and store the Customer's General Information on the Memory.
1°
- Turn on the Birio LC device, open the file and plug-in the Birio
Memory
- Click on the window "Connect"
- " PC OPERATIONS " will be displayed on the Birio LC as a connection
confirmation
2°
- Click on "Read Memory": the codes of the Siti Transmitters stored inside
the Memory will be displayed: the code is a sequence of numbers and
letters made up of 3 numbers of 2 figures each.
- The Receiver's channels and their respective buttons wil be displayed in
the Transmitter window.
Read
Memory
Click
Connect
Click
Code number
<< Previous
Following>>
n° position
00 01 B5 03
3°
IMPORTANT :Fill in the windows with the Customer's Name and the General information for
the operations you need to carry out and in order to have a Customers' list with their
corresponding Siti transmitters.
general information
Customer's name
Mario Rossi
Condominio via Garibaldi 17
page 31
PC OPERATIONS
DISPLAY
4213
DELETE
KEYS
COPY
REPLACE
DELETE
COPIY
ONE
BUTT
ON
MEMOR
Y
Siti
Siti
Siti
Siti
GB