fadini Siti 63, Instructions Manual

Page: 20 / 48

Key deleting operation can be carried out according to the Device family:
- The Master Device (for ex. A) can delete the 1st and the 2nd key to Transmitters and Memories which were encoded with keys beloging to the same
family
- The Slave Device (for ex. A1, A2,...) can delete only the 2nd key (C2) from those Transmitters and Memories which were encoded with the 1st and the
2nd key.
If an "Error" message is displayed it means that the operation was not correctly carried out, or that the transmitter is encoded with
a key-code belonging to a different family.
IMPORTANT: when the operation is completed, check the transmitter information by following the operation
"transmitter data reading" on page 14.
page 16
1°
Follow the operation transmitter data reading, page 14.
Push the button Delete Key : the message "T- Delete Key" followed by "Enter
Transmitter" will be displayed
2°
3°
Position the transmitter onto the Birio LC Device . When the led turns off the
operation is completed.
N.W. If, when the led turns off, another transmitter is positioned, before
TRANSMITTER is displayed, it is possible to delete the key to this second
transmitter too.
TRANSMITTER KEY DELETING
With this operation the Birio LC Device will read, recognize and display the Transmitter key-codes and the family they belong to.
If an "Error" message is displayed it means that the operation was not correctly carried out, or that the transmitter is encoded
with a key-code belonging to a different family.
1°
Switch on the Birio LC Device and the led will
illuminate. TRANSMITTER mode is immediately
displayed.
2°
Push any transmitter button and one of the following information will be
displayed:
- No Key;
- 1 Key : Family...
- 2 Keys: Family...
and then the transmitter code will be displayed
Return to mode transmitter.
All the following operations will refer to this transmitter whose information was read the last by the Birio LC
Device.
IMPORTANT : If during the 1st and the 2nd phase of this operation the button "Copy-Substitute-Delete-Copy 1 button" is pressed, the message " PRESS
TRANSMITTER FIRST " will be displayed
3°
page 14
ON
OFF
SUPPL
Y
9 VOL
T
ON | OFF
MEMORY
ENTER
KEYS
DELETE
KEYS
COPY
REPLAC
E
DELET
E
COPY O
NE BU
TTON
SELECT
IONNER
CODE
Birio
LC
SUPPLY
9 VOLT
ON / O
FF
No Key
DISPLAY
Transmitter Code:
00 20 D9
TRANSMITTER DATA READING
TRANSMITTER
DISPLAY
Enter Transmitter
T - Delete Key
DISPLAY
TRANSMITTER
DISPLAY
TRANSMITTER
DISPLAY
TRANSMITTER
DISPLAY
REPLACE
DELETE
COPY ONE BUTTON
COPY
MEMORY ENTER
KEYS
DELETE
KEYS
SELECT
CODE
MEM
ORIY
ENTER
KEYS
DELETE
KEYS
COPY
REPLAC
E
DELETE
COPY ONE BU
TTON
SELECT
CODE MEMORY
Birio
LC
GB
4213
Siti
Siti