4
PIC. 2
INSTRUCTIONS FOR THE INSTALLATION OF COMBI 740, ELECTRO-HYDRAULIC, BELOW GROUND, ALL-IN-ONE,
WITH ANTI-CRUSH SYSTEM.
PIC. 3
Pre-arrangements are possible in the case that the mechanism is installed at a later stage after mounting the gate and finishing the
pavement. You will have to set the enclosure and fit the special gate spacer hinge which is designed to temporary replace the mechanism.
Picture No. 3.
The two enclosures must be perfectly aligned one opposite the other. The simple operation described below will ensure this: a nylon
wire must pass through the centres of the holes which are factory made in the enclosures to this purpose. Picture No. 3.
HOLE
HOLE
HOLE
HOLE
746
L
H
747
L
H
746
R
H
747
R
H
GATE SPACER HINGES
NYLON WIRE
®
It is recommended to keep to these instructions to install the equipment in the correct way to get a perfect working system. Electro-
hydraulic operator consisting of a jack combined to a motor pump unit for the operation of swinging gates. All-in-one in a specially
designed enclosure to be sunk in the ground under the gates as shown in picture No. 2.
LEFT-HANDED
RIGHT-HANDED
741
745
746
747
748
MOTOR-PUMP/JACK. HYDRAULIC
110
°
ROTATION, NON LOCKING
ENCLOSURE
GATE FIXING PLATE WITH SHAFT
FITTING COLLAR
GATE SPACER HINGE
EMERGENCY LOCKING SHOE WITH
COLLAR AND RELEASE SPANNER
VIEW FROM INSIDE THE PROPERTY
748 L
H
745 L
H
741 L
H
741 R
H
745 R
H
748 R
H
LEFT-HANDED
RIGHT-HANDED
746
747
GATE FIXING PLATE WITH SHAFT
FITTING COLLAR
GATE SPACER HINGE
746
747
GATE FIXING PLATE WITH SHAFT
FITTING COLLAR
GATE SPACER HINGE
WASHER
=
L
H
=
R
H
