11
COMBI 740 TECHNICAL SPECIFICATIONS
PIC. 22
Via Mantova, 177/A - 37053 Cerea (VR) Italy - Tel. 0442 330422 r.a. - Fax 0442 331054
®
s.n.c.
®
A
140
140
470
235
235
300
45
35
ø 12
190
B
190
50
10
40
50
35
30
C
®
A
The combined motor and jack of the COMBI 740 employs
the latest technology with a quiet-running steel lobe pump
at its heart, creating and holding greater pressures for
hydraulic locking and drive than most other underground
gate operators.
B
Gate fixing device (locking version) is welded or screwed
to gate foot. Lock can be released by special key.
C
Gate fixing device (non locking version) is welded to gate
foot.
D
Fix to the ground proper gate stops both in the open and
closed gate position. See page 7 in the installation manual.
Left-handed unit.
View from inside property.
Suitable for gate width from 2 up to 3.5 m max. with or without
locking/dampening depending on gate size and site requirements.
DOUBLE STROKE JACK AND OIL-HYDRAULIC PUMP
Pump flow rate - P3 ...........................................................0.85
l
/min.
Working pressure ....................................................1 MPa (10 bars)
Max. pressure...........................................................3 MPa (30 bars)
Working temperature ....................................................–20
°
C +80
°
C
Rotation time (110
°
).......................................................................23 s
Oil type ..............................................................A 15 FADINI by AGIP
Shaft rotation angle .....................................................................110
°
Rated torque ............................................................................235 Nm
Cylinder bore .............................................................................75 mm
Stroke .........................................................................................52 mm
Weight with accessories ..........................................................27 Kg
Static gate weight ....................................................................700 Kg
IP Standards...............................................................................IP 673
Overall dimensions.................................................470x300x150 mm
DAMPENING
Pump flow rate - P3 ...........................................................0.85
l
/min.
Rotation time (175
°
).......................................................................28 s
CLASS H, TWO-PHASE, ELECTRIC MOTOR
Power output .........................................................0.18 KW (0.25 HP)
Supply voltage................................................................230 V - 50 Hz
Absorbed current ........................................................................1.2 A
Absorbed power........................................................................250 W
Capacitor ...................................................................................12.5
+
F
Motor rotation speed.......................................................1˙350 r.p.m.
Intermittent service........................................................................S 3
Duty cycle ................23 sec. Open - 30 sec. Dwell - 23 sec. Close
Time of one complete cycle ........................................................76 s
No. of complete cycles Open - Dwell - Close ....................47/hour
No. cycles a year, 8 hours a day ..........................................137˙000
0.25
1.2
50
12.5
MOTOR
W
VOLTS
r.p.m.
Nm
2 PHASE
250
230
1˙350
235
HP
A
Hz
+
F
Shaft ro. 110
°
- 23 sec. - P3 - 0.85
l
/min.
Shaft ro. 175
°
- 28 sec. - P3 - 0.85
l
/min.
Temperature –20
°
C +80
°
C
Degree of protection IP 673
Working pressure max. 3 MPa (30 Bars)
OIL FADINI A15 BY AGIP
MADE IN ITALY
STICKER WITH ELECTRIC MOTOR SPECIFICATIONS
