Factory Five Racing GTM Supercar, Assembly Manual

Page: 250 / 764

241
www.factoryfive.com 508-291-3443
(Optional) Telescoping Column

7
/
16
”, ½”, 9 /
16
” wrench, 5 /
32
”, 3 /
16
”, 5 /
16
”, 4mm Hex keys, ⅛ ”, 3 /
16
” drill bits, drill, 5 /
32
” punch, hammer.

Steering shaft, steering system hardware, Telescoping Steering Column adapter Assembly (FFR#
25545, 26022, 25743, 25892).
Cut 1
7 /
8
” off of the 9” long x ¾” DD shaft (FFR# 25523). Remove any burs from cutting on both shafts as
even a slight bur will make it very difficult to fit the shaft in the universal joint or hollow DD shaft.
Drill a
3 /
8
” hole through the 1 7 /
8
” long shaft 1.25” in from one end on the flat surface of the shaft.
Insert the supplied spacer (FFR# 25866) into the lower end of the Corvette shaft, lining up the holes.
Insert the 1
7 /
8
” x ¾” DD shaft into the lower portion of the Corvette lower shaft. Using a screwdriver or a
punch to hold the spacer in place helps to keep the holes lined up.