Factory Five Racing GTM Supercar, Assembly Manual

Page: 344 / 764

335
www.factoryfive.com 508-291-3443
L Tan Headlight Low Beams Black (relay #86) from low beam
relay (white wire (relay #30)
input is #909)
M ---- Not used
N Black Ground Ground
P ---- Not used
R Brown Parking/Dash Lights Black (relay #86) from parking
relay (white wire (relay #30)
input are 927 and 929)
S White Headlamp switch, on
T Dark green Headlamp switch, off
U Orange Corner lamp feed, left
V Black Horn relay output Black from painless horn relay
W Red Battery Positive Red/black 928
X Red Battery Positive Red/black 928
Y Light Blue Park lamp switch output
Z Orange Battery Positive Orange 959
*The dark green and dark blue wires from the Painless harness need to be spliced into the dark green wire
on the Corvette harness (Pin B). Similarly, the yellow and light blue wires from the Painless harness need
to be spliced into the yellow wire of the Corvette harness (Pin C). These wires will allow proper function
of the Hazard lights.

Two circuits from the chassis harness will not be used and should be taped off. The white brake
switch to turn signal switch wire and the Blue/Yellow dimmer switch wire.
Hazard Wiring

Wire crimper, wire stripper

Dash components, misc. electrical
Strip and connect the wires to the switch connectors.
Connect the switch wires.