Factory Five Racing GTM Supercar, Assembly Manual

Page: 212 / 764

203
www.factoryfive.com 508-291-3443
Unpacking Your GTM Kit
Please note that your boxes are numbered, when you read your packing list you will see that next to each
assembly there is a number circled. This is the box number that the assembly was packaged into.
After everything is safely in your garage, take the time to open each box and do a physical inventory of all
the parts. It is a good idea to work one box at a time and replace all the contents before going on to the
next box.
Removal of Body

Marker, #6 hex driver.
Three strong people can remove the body from the chassis. One person on either side located where the
door openings are and the additional person at the back of the vehicle. Removing the body should be done
very carefully. You might have to pull slightly on the sides of the body to clear the door hinges, door
striker mount and lower tubing on the frame. Once the body is removed, it is fine to store it directly on the
ground.
Aluminum Removal and Preparation
Using a marker outline the underside of each panel where it contacts the chassis. This is done to locate
where to drill rivet holes when the panels are permanently mounted later on.