Factory Five Racing GTM Supercar, Assembly Manual, Page: 289 / 764

280
www.factoryfive.com 508-291-3443
Transaxle Install
1990 and Later G50

17 mm wrench, 10, 13, 17 mm socket, ¾” socket/wrench, Ratchet, pick and/or screwdriver.

Transmission, Clutch, Pressure Plate, Transmission Mount, 90-98 G50 Transaxle Adapter Kit.

The transaxle is a heavy and has to get aligned with the studs on the adapter plate making it
extremely hard for someone to do on their own. Find assistance during this step.
Install the supplied studs on the adapter plate. The longer stud should be installed on the lower right
corner of the adapter plate (Picture shown is with the engine out of the car, pilot bearing not installed).
Bolt the flywheel to the crankshaft, and then install the clutch disc, followed by the pressure plate. Don’t
be alarmed by how close the studs are to the flywheel – this is the way the transmission was designed –
it’s a very tight fit!