Page
14
with
33
Page
14
with
33
Page
14
with
33
Page
14
with
33
MANUAL - WELDER Fantasy PULSE BI-201
C. SELECTION OF WELDING METHODS
C. SELECTION OF WELDING METHODS
Using the 2
or 6
select the desired method of welding, and then
confirm by pressing 5
AUTO mode
- setting synergistic. The user selects the basic welding parameters such as type of material, the plate
AUTO mode
- setting synergistic. The user selects the basic welding parameters such as type of material, the plate
thickness, the diameter of the welding wire. Other parameters of the device selects automatically uploaded using the
base program.
MIG mode
- welding of individual students using the user's settings. The system prompts the selection of key welding
MIG mode
- welding of individual students using the user's settings. The system prompts the selection of key welding
parameters indicating the adjustment of the plate thickness. This information suggests the user to correct settings
made.
Lift TIG mode (
arc ignition by friction) - welding the tungsten electrode in inert gas. In order to perform welding by this
Lift TIG mode (
arc ignition by friction) - welding the tungsten electrode in inert gas. In order to perform welding by this
method it is necessary to retrofit device TIG adjustable shielding gas in the handle as in the following image. This
method it is necessary to retrofit device TIG adjustable shielding gas in the handle as in the following image. This
handle is not a standard set of equipment.
MMA mode
- welding coated electrode. User-adjustable welding current can also set the ARC-FORCE, HOT START
MMA mode
- welding coated electrode. User-adjustable welding current can also set the ARC-FORCE, HOT START
and enable or disable the protective system VRD.
ARC FORCE - stabilizes the arc regardless of variations in its length, reduces the amount of spatter.
HOT START - start function for easy welding. Upon ignition of the arc is temporarily increased welding
current in order to heat the material and the contact point electrode and the proper formation of welds and
weld face at the initial stage of welding.
VRD - the device has a system VRD (Voltage Reduction Device) which mode MMA Rutile and basic
electrodes lowers the load voltage, which greatly enhances user safety. In special cases, the use of
electrodes with high current arc ignition problems can occur at his initiation.
