Page
15
with
33
Page
15
with
33
Page
15
with
33
Page
15
with
33
MANUAL - WELDER Fantasy PULSE BI-201
D. AUTO Mode (MIG / MAG)
D. AUTO Mode (MIG / MAG)
In the AUTO mode, a user makes a selection of only the basic welding parameters such as type of material,
the plate thickness, the diameter of the welding wire (available 0.8 mm, 1.0 mm and 1.2 mm). Other parameters of the
device selects automatically uploaded using the base program.
AUTO mode only allows continuous welding
device selects automatically uploaded using the base program.
AUTO mode only allows continuous welding
current
-
there is no possibility of adjusting the settings mode and dual PULS PULS.
There is a possibility of manual adjustments to the synergistic.
ATTENTION:
If you change the type of material and its thickness, the system returns with the other parameters to the
ATTENTION:
If you change the type of material and its thickness, the system returns with the other parameters to the
factory defaults.
Step 1 Choose material
The user selects the welding material (wire and
welding) from the list of alloys available in the
program.
Step 2 Select the thickness of the welded material
The user selects thickness of the welded material. The
device on the ground automatically adjusts the welding
current, arc voltage and welding speed of the feeder.
0.8mm wire
Step 3 Select the diameter of welding wire
The user selects the diameter of welding wire, which it
plans to use.
ATTENTION!
The device automatically increases or reduces its
maximum power depending on the diameter of the wire.
