Page
32
with
33
Page
32
with
33
Page
32
with
33
Page
32
with
33
MANUAL - WELDER Fantasy PULSE BI-201
8.
Advertised device must be returned in the box properly packed protected against damage in transit needs to be determined if
required "up - down" or "glass carefully."
9.
The company has skilled person does not accept complaints and returns sent to the address of the Company for downloading!
10. The guarantee document is valid if you have correctly completed entries regarding: the date of sale, the name
10. The guarantee document is valid if you have correctly completed entries regarding: the date of sale, the name
equipment sold, stamp and signature of the seller and the customer acknowledges his signature.
11. The warranty does not cover the activities foreseen in the manual, for which execution
11. The warranty does not cover the activities foreseen in the manual, for which execution
the user is required to own and at their own expense, for example. start-up, maintenance, replacement batteries, and other supplies.
12. Said faulty equipment and parts become the property of the Guarantor.
12. Said faulty equipment and parts become the property of the Guarantor.
REFUSAL OF COMPLAINTS:
The guarantor may refuse to accept the complaint if:
•
statement using the unit misused and instructions,
•
delivery device dirty, no standard equipment, without nameplate
and seals
or hologram
•
determine the cause of the fault other than manufacturing or material defect inherent in the device,
•
formal defects associated with the sales documents, such as unfilled warranty card, lack of proof of purchase.
ARE NOT COVERED BY WARRANTY:
1.
The parts which, when aligned with the recommendations of operation are subject to wear and tear within the warranty period, such as welding
torches, handles mass nozzles, burners, batteries, belts, filters, oil, electrodes, gaskets, o-rings and other items directly related to the exploitation.
2. Disadvantages caused by mechanical damage, thermal or chemical plant and equipment.
2. Disadvantages caused by mechanical damage, thermal or chemical plant and equipment.
3. Damage caused due to improper transport and storage,
3. Damage caused due to improper transport and storage,
4. Damage associated with working at too low or too high a temperature,
4. Damage associated with working at too low or too high a temperature,
5. Damage caused by faulty electrical installation User, flooding or moisture components
5. Damage caused by faulty electrical installation User, flooding or moisture components
electric water,
6. Wrong connection to a power source (eg. Poor polarity, poor connection 230 or 400 V, there are no phases or too loose
6. Wrong connection to a power source (eg. Poor polarity, poor connection 230 or 400 V, there are no phases or too loose
clamped connection cables)
7. Damage caused by overload device, overheating,
7. Damage caused by overload device, overheating,
8.
Incorrect setting welding parameters, interference in the control panel screw compressors,
9.
Bad selection of the parameters in the supply pressure to the unit,
10. Damage due to lack of recommended maintenance procedures contained in this manual,
10. Damage due to lack of recommended maintenance procedures contained in this manual,
11. Cleaning with too high pressure or aggressive chemicals,
11. Cleaning with too high pressure or aggressive chemicals,
12. Damages caused by too strong a tightening or causing damage to the components niedokręcaniem
12. Damages caused by too strong a tightening or causing damage to the components niedokręcaniem
or excessive bandwidth connections (spray guns)
13. Improper use.
13. Improper use.
LOSS OF WARRANTY AS FOLLOWS
Loss of warranty in the event;
1.
non manual
2.
improper operation
3.
overloading the machinery
4.
operation without lubricants
5.
dismantling unauthorized
6.
breaking holograms