Page
23
with
33
Page
23
with
33
Page
23
with
33
Page
23
with
33
MANUAL - WELDER Fantasy PULSE BI-201
POLARITY TIG WELDING
For most welding TIG apply a negative polarity. The welding gun is connected to the negative pole, while the mass
holder to the positive pole. Is limited in this way, the consumption of the electrode increases, the heat buildup in the
weld material.
Ignition in TIG LIFT
To ignite the welding arc in TIG LIFT unscrew the valve on the handle, press the button, and then gently rub the
tungsten electrode of the welded part of the burner and lift slightly so that the arc ignition occurred.
Releasing the switch causes the end of the welding process (2T).
Example welding torch TIG lift valve in the burner.
ATTENTION!
TIG is not a standard set of equipment.
