S2500I
532324 - Rev. A
12
FAAC S.p.A. Soc. Unipersonale
Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITÁLIE
Tel. +39 051 61724 - Fax +39 051 09 57 820
www.faac.it - www.faacgroup.com
Order:
83469
Item origin:
sampled and supplied by the customer
Activity date:
25 February 2020
Activity site:
FAAC S.p.A. Via Monaldo Calari, 10 - 40069 Zola
Predosa (BO) - Italy
Contents
Page
Description of item*
2
Apparatus
2
Method
3
Environmental conditions
3
Results
4
This document is made up of 4 pages and 1 annex
and
shall not be reproduced except in full without
extrapolating parts of interest at the discretion of the
customer, with the risk of favoring an incorrect
interpretation of the results, except as defined at
contractual level.
The results relate only to the item examined, as
received, and are valid only in the conditions in which
the activity was carried out.
This document is the English translation of the test
report No. 370431 dated 18 March 2020 issued in
Italian; in case of dispute the only valid version is the
Italian one. Date of translation: 18 March 2020.
The original of this document consists of an electronic
document digitally signed pursuant to the applicable
Italian Legislation.
Chief Test Technician:
Dott. Giacomo Rito
Head of Security and Safety Laboratory:
Dott. Andrea Bruschi
Compiler:
Agostino Vasini
Reviewer:
Dott. Giacomo Rito
Page 1 of 4
Istituto Giordano S.p.A.
Via Gioacchino Rossini, 2
47814 Bellaria-Igea Marina (RN) - Italia
Tel. +39 0541 343030 - Fax +39 0541 345540
www.giordano.it
PEC: [email protected]
Codice fiscale/Partita IVA: 00 549 540 409
Capitale sociale € 1.500.000 i.v.
R.E.A. c/o C.C.I.A.A. (RN) 156766
Registro Imprese della Romagna - Forlì-Cesena e Rimini n. 00 549 540 409
TEST REPORT No. 370431
Customer
FAAC S.p.A.
Via Monaldo Calari, 10 - 40069 ZOLA PREDOSA (BO) - Italy
Item*
hinge kit for gates named
“cerniera S2500l”
Activity
determination of mechanical resistance under load
Results
Loading condition
Deformation
Transducer No. 1 Transducer No. 2
[mm]
[mm]
addition of 100 kg
0,01
0,04
addition of 200 kg
0,03
0,06
addition of 300 kg
0,14
0,14
addition of 400 kg
0,33
0,34
addition of 500 kg
0,52
0,54
addition of 600 kg
0,80
0,60
45° movement with maximum load
0,92
0,70
90° movement with maximum load
0,68
0,35
initial position with maximum load
1,31
0,45
after 15 min with maximum load
1,50
0,44
residual after discharge
0,68
0,20
(*) according to that stated by the customer.
Bellaria-Igea Marina - Italy, 18 March 2020
Chief Executive Officer