FAAC H4, Installation And Use Instructions Manual, Page: 33 / 36

33
To facilitate putting the system into operation, we advise you to do the following:
- write the configuration of your system in the following table (type of detector, location, configuration , etc.),
- identify every detector (with numbers).
Remember that the control and information keypad enables you to assign names, which are already present in
the system's memory.
System parametering memo
R
OFF
I
MOVEMENT DETECTOR
1 : Immediate / Delayed (OFF / ON)
OPENING DETECTOR
1 : Detector / Transmitter (OFF / ON)
2 : Immediate / Delayed (OFF / ON)
3 : NC / NO (OFF / ON)
TRANSMISSION CONTROL UNIT
1 : Indoor siren (OFF enabled)
2 : Siren confirmation acoustic level (OFF
loud)
3 : Control unit supervision (ON enabled)
4 : Pre-alarm acoustic signals (ON enabled)
5 : Radio 'dazzling' (ON enabled)
6 : Transmitter (ON enabled)
7 : Mono-bi frequency transmission (OFF bi-
frequency)
CUSTOMISED CONFIGURATION
SUMMARY
Protected rooms Detectors Timed Quantity AREAS
Type YES NO A1 A2 A3 A4
Entrance / Hall
Identity
Movement
Opening
Corridor
Movement
Opening
Living room
Movement
Opening
Kitchen
Movement
Opening
Bedrooms
Movement
Opening
Garage
Movement
Opening
Movement
Opening
Movement
Opening