![background image](http://html1.mh-extra.com/html/faac/daab-mt/daab-mt_user-instructions_3127505009.webp)
INSTRUCTION MANUAL MT, MA2, MK2, M10 DRIVE UNIT
9
Gate mounting and link arm
3
Screw together the link arm with the
gate mounting and drive arm. The
lateral position of the gate mounting
can be determined when the gate is
fully closed and the drive arm and link
arm are in line.
The gate mounting should be as close
to the pivot point as possible as this
provides the best geometry.
Screw the gate mounting into place
using two M8 bolts and washers.
• Top mounting
Bracket & mounting plate
1
Positioned centrally above the gate
opening.
Dimensions and mounting according
to the point entitled "Mounting
plate" in the chapter "Installation and
commissioning; General installation"
2
Centre the plate horizontally above
the gate opening. Height dimensions
in accordance with a separate assembly
drawing. Then weld the motor plate
onto the mounting plate.
Summary of Contents for DAAB MT
Page 29: ...INSTRUCTION MANUAL MT MA2 MK2 M10 DRIVE UNIT 29...
Page 30: ......