INSTRUCTION MANUAL MT, MA2, MK2, M10 DRIVE UNIT
22
• Top mounting with limited lateral space
Bracket & mounting plate
1
Centre the plate horizontally above the gate
opening. Height dimensions in accordance with
a separate assembly drawing. Then weld the
motor plate onto the mounting plate.
Drive arm
2
Install the drive arm by removing the bolt and
washer / retaining ring on the output shaft from
the drive unit and pressing the arm into place.
Then reinstall the bolt and washer / retaining ring.
Gate mounting
3
Screw the gate mounting into place using two M8 bolts according to the assembly
drawing.
Mounting plate for the swing arm bracket
4
Position the mounting plate for the swing
arm bracket according to the point entitled
"Mounting plate" in the chapter "Installation
and commissioning; Side installation".
Summary of Contents for DAAB MT
Page 29: ...INSTRUCTION MANUAL MT MA2 MK2 M10 DRIVE UNIT 29...
Page 30: ......