INSTRUCTION MANUAL MT, MA2, MK2, M10 DRIVE UNIT
15
• Installing the drive unit
Installation of the drive unit is common to all types of mounting.
The motor is located in different holes depending on the angle at which it is positioned. Viewed from the left this is 90, 100
and 110 degrees. The angle to be used is indicated in the assembly drawing supplied with the unit.
1
Insert the drive unit in the bracket.
2
Tighten one bolt.
3
Turn the drive unit to make the installation
of power and limit position cables easier.
4
Turn back the drive unit and tighten the
other bolt.
Summary of Contents for DAAB MT
Page 29: ...INSTRUCTION MANUAL MT MA2 MK2 M10 DRIVE UNIT 29...
Page 30: ......
