INSTRUCTION MANUAL MT, MA2, MK2, M10 DRIVE UNIT
20
• Top mounting
Bracket & mounting plate
1
Positioned centrally above the gate
opening.
Dimensions and mounting according
to the point entitled "Mounting
plate" in the chapter "Installation and
commissioning; General installation"
2
Centre the plate horizontally above
the gate opening. Height dimensions
in accordance with a separate assembly
drawing. Then weld the motor plate
onto the mounting plate.
Drive arm
3
Install the drive arm by removing the bolt and
washer / retaining ring on the output shaft from
the drive unit and pressing the arm into place.
Then reinstall the bolt and washer / retaining
ring.
Gate mounting
4
Screw the gate mounting into place using two M8 bolts according to the assembly
drawing.
Summary of Contents for DAAB MT
Page 29: ...INSTRUCTION MANUAL MT MA2 MK2 M10 DRIVE UNIT 29...
Page 30: ......
