FAAC DAAB EP104 V4.08, Manual, Page: 35 / 60

CHANNEL LIST DAAB AUTOMATIC CONTROL UNIT EP104 4.08
35 Channel list edition 1 for EP104 version 4.08
Programmable output 4
No. Name Range Factory Setting
o400 Function of output 4 0 - 4 0
0 Disabled
1 Position indication/Movement/Warning. Signal as configured in o410 – o422
2 Presence detection/Direction sensing. Signal as configured in o491
3 Lock
4 Alarm output Signal as configured in o430 – o442
o410 Open position 0 - 2 0
0 Disabled
1 Constant signal
2* Flashing signal, invalid selection for DB410
o411 Mid position 0 - 2 1
0 Disabled
1 Constant signal
2* Flashing signal, invalid selection for DB410
o412 Closed position 0 - 2 1
0 Disabled
1 Constant signal
2* Flashing signal, invalid selection for DB410
o413 Movement 0 - 7 0
0 Disabled
1 Constant signal in the opening movement
2 Constant signal in the closing movement
3 Constant signal in the opening and closing movement
4 No signal during movement, used in combination with o410, o411 and o412.
5* Flashing signal in the opening movement, invalid selection for DB410
6* Flashing signal in the closing movement, invalid selection for DB410
7* Flashing signal in the opening and closing movement, invalid selection for DB410
o414 Delayed switch-off Switch off after the specified time For
example to switch off lighting a specified time after closing
0.00-9.59 minutes 0.00
o420 Warning time before start 0.00-9.59 minutes 0.00
o421 Warning function in combination with o420 1 - 8 2
1 Constant signal before automatic closing
2 Constant signal before park and automatic closing
3 Constant signal before close signal, park and automatic closing
4 Constant signal before all signals
5* Flashing signal before automatic closing, invalid selection for DB410
6* Flashing signal before park and automatic closing, invalid selection for DB410
7* Flashing signal before close signal, park and automatic closing, invalid selection for DB410
8* Flashing signal before all signals, invalid selection for DB410
* WARNING! This setting is possible, but NOT permitted for DB410! Selecting it means that the relay output will cease
to function. The channel selection for flashing function may be used only together with DB407.