FAAC DAAB EP104 V4.08, Manual, Page: 19 / 60

CHANNEL LIST DAAB AUTOMATIC CONTROL UNIT EP104 4.08
19 Channel list edition 1 for EP104 version 4.08
No. Name Range Factory Setting
d161 Type of control signal when activated 1 - 2 1
1 Pulse
2 Constant signal when loop is activated
d162 Half operation 1 - 3 3
1 Motor 1
2 Motor 2
3 Motors 1 and 2
d163 Limited opening 0 - 1 0
0 Disabled
1 Opening for the time set in channels C412 and C414 or L116 and L126
d170 Allows the opening function, via LOOP1, using a
programmable input.
0 - 6 0
0 Disabled, normal opening/closing function. (Programmable input has no function for LOOP1)
1 Opening possible only if there is a signal at programmable input 1
2 Opening possible only if there is a signal at programmable input 2
3 Opening possible only if there is a signal at programmable input 3
4 Opening possible only if there is a signal at programmable input 4
5 Opening possible only if there is a signal at programmable input 5
6 Opening possible only if there is a signal at programmable input 6
d175 Opening via loop after activation for the set time, the
loop will not open the gate until it has been activated
for the set time.
0.0-9.0 sec 0.0
d190 Interlock opening 0 - 1 0
0 Disabled
1 Sends a normal open signal to the remote door