FAAC DAAB EP104 V4.08, Manual, Page: 18 / 60

CHANNEL LIST DAAB AUTOMATIC CONTROL UNIT EP104 4.08
18 Channel list edition 1 for EP104 version 4.08
• DB402, Vehicle detector, d-channels
Vehicle loop 1
No. Name Range Factory Setting
d100 Loop 1 0 – 1 0
0 Input disabled
1 Input enabled
d101 Loop reading x1 000-999
d102 Loop reading x1000 00-99
d103 Impact from vehicle at passage 000-999
d110 Detection level of vehicle at loop passage 05-99 15
d111 Detection level hysteresis 00-50 03
d120 Loop presence reset 000 and 005-240
minutes
120
d121 Fast loop presence reset 00-99 sec 00
d131 Compensation for activation from door half motor 1
on the loop in the closed position
00-50 03
d132 Compensation for activation from door half motor 2
on the loop in the closed position
00-50 03
d140 Safety function in closing movement 0 - 4 1
0 Disabled
1 Reverse
2 Stop with automatic restart of automatic closing
3 Stop without automatic restart of automatic closing, wait for new control signal
4 Safety only in open position. Used when the gate passes over the loop in the closing movement.
d141 Safety during run-on time or disengagement angle in
closing movement.
0 – 1 1
0 Disabled
1 Activated according to d140
d142 Safety function in opening movement 0 - 4 0
0 Disabled
1 Reverse to fully closed
2 Stop with automatic restart of automatic closing
3 Stop without automatic restart of automatic closing, wait for new control signal
4 Safety only in closed position. Used when the gate passes over the loop in the opening movement.
d151 Loop-based closing 0 - 1 0
0 Disabled
1 Active
d154 Type of closing 1 - 2 2
1 Close immediately when loop is clear
2 Continue to fully open, then close
d160 Control function 0 - 1 0
0 Disabled
1 Open