B614 10
732998 - Rev.A
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
3.4 EMERGENCY USE
In emergencies or if there is a fault, turn off the power
supply to the automation and disconnect the buffer
batteries if there are any. If the beam can be moved
safely by hand, use the MANUAL OPERATION mode;
otherwise place the automation out of service until it
has been reset/repaired.
In the case of a breakdown, the automation must be
reset/repaired exclusively by the installer/maintenance
technician.
3.3 UNAUTHORISED USE
-
Uses other than the intended use are prohibited.
-
It is prohibited to install the automation system
outside of the limits specified in the Technical Data
and Installation Requirements sections.
-
It is forbidden to use B614 in a constructional
configuration other than the one provided by the
manufacturer.
-
No component part of the product may be mo-
dified.
-
It is prohibited to install the automation system
on escape routes.
-
It is prohibited to install the automation system in
environments in which there is a risk of explosion
and/or fire: the presence of flammable gases or
fumes is a serious safety hazard.
-
It is prohibited to power the system with energy
sources other than those specified.
-
It is prohibited to integrate commercial systems
and/or equipment other than those specified, or
use them for purposes not intended and authorised
by their respective manufacturers.
-
Do not allow water jets of any type or size to come
into direct contact with the actuator.
-
Do not expose the actuator to corrosive chemicals
or atmospheric agents.
-
Do not expose the barrier to direct jets of water of
any type and size.
-
Do not expose the barrier to aggressive chemical
or environmental agents.
-
The barrier may not be used to move moving parts
other than the beams produced by FAAC specified
in this manual.
-
Use to control pedestrian access, bicycle traffic and
the passage of animals is prohibited.
-
Use of the barrier at level crossings is prohibited.
-
Use of the barrier on public thoroughfares is
prohibited.
-
It is prohibited to use and/or install accessories
which have not been specifically approved by
FAAC S.p.A.
-
It is prohibited to use the automation system before
performing commissioning.
-
It is prohibited to use the automation system in the
presence of faults which could compromise safety.
-
It is prohibited to use the automation system with
the fixed and/or mobile guards removed or altered.
-
Do not use the automation system unless the area
of operation is free of persons, animals or objects.
-
Do not enter/remain in the area of operation of the
automation system while it is moving.
-
Do not try to prevent the movement of the auto-
mation system.
-
Do not climb onto the actuator.
-
Do not climb or catch on to the beam or lift yourself
up on it. Do not climb on the barrier cabinet.
-
Do not allow children to approach or play in the
area of operation of the automation system.
-
Do not allow the control devices to be used by
anyone who is not specifically authorised and
trained to do so.
-
Do not allow the control devices to be used by
children or persons with mental and physical de-
ficiencies unless they are supervised by an adult
who is responsible for their safety.
!
During manual handling, accompany the beam slowly
for the entire stroke. Do not let the beam travel freely.
