![background image](http://html1.mh-extra.com/html/faac/a1400-air/a1400-air_manual_3121388021.webp)
A1400 AIR
21
532129 04 - Rev.B
30
200
200
30
30
37,5
117
55
1
1
2
6
1
8
15
Nm
2
6
6
Nm
Tr
ansla
tion of the original instruc
tions
ENGLISH
6. ASSEMBLING THE HEAD SECTION
1. Fasten the support profile to the self-supporting profile
6
-
:
-
start fastening at a vertical slot at one end and a horizontal slot
at the other end.
Check the horizontal with a spirit level.
-
proceed with the other fastenings at a 200 mm distance; alternate
vertical and horizontal slots.
2. Fasten the side brackets at the ends:
-
insert the plates into their housings and fasten the 2 side brackets
to the ends of the support profile and self-supporting profile
6
-
.
use the screws and the plates supplied
If the A1400 AIR KIT has been supplied, the components must be installed
on the support profile. This operation is performed in the shop. The as-
sembled head section is then moved to the installation site.
For handling instructions see
19
.
RISKS
PERSONAL PROTECTIVE EQUIPMENT
REQUIRED TOOLS
Ø 18 mm
6-8-10-13
5
!
A torque wrench must be used to achieve the specified fastening torques
(Nm).
For manual lifting, arrange for an adequate number of people for the
weight of the leaf: 1 person for every 20 kg to be lifted.
6.1 PREPARING THE SELF-SUPPORTING HEAD
SECTION (if used)
ONLY in cases where the head section is to be fastened to the side walls,
the self-supporting head section must be prepared:
the support profile, self-supporting profile and the side brackets are as-
sembled before assembling the automation components.
Summary of Contents for A1400 AIR
