F5 ARX-2500, Hardware Installation Manual

Page: 29 / 68

About the Slide-Rail Mounting Kit
ARX-2500 Hardware Installation Guide 2 - 7
2. Attach the bracket to the PEM fasteners, as shown in the following
figure.
3. Slide the bracket toward the back of the component to lock the
bracket into place.
4. Repeat steps 1 through 3 on the other side of the ARX-2500.
5. Lift the component into the rack.
6. Secure the ARX-2500 to the rack using customer-supplied
hardware.
The component must be securely fastened to the rack to provide
adequate stability and to prevent it from falling out of the rack. If
the rack does not provide adequate support, a shelf kit may be
necessary. If you install a shelf kit, it is recommended that you
install one created by the rack manufacturer.
About the Slide-Rail Mounting Kit
The slide-rail mounting kit enables you to slide the switch in or out of the
rack for maintenance. You can identify the slide-rail mounting kit by its
silver rails. See the following figure.
Figure 2.2 Slide-Rail Mounting Kit