F5 ARX-2500, Hardware Installation Manual

Page: 61 / 68

Before You Begin
ARX-2500 Hardware Installation Guide A - 3
Before You Begin
The following sections describes how to replace optical transceivers and
chassis.
Note
When returning chassis to F5 Networks, you must include the chassis serial
number. In some cases, you also need to include the base MAC address.
From the CLI, enter the show chassis command to obtain the serial number.
If you cannot reach the CLI, read the serial number on the front, righthand
side of the chassis (under the cooling vents).
See the following example output for the show chassis command and note
the serial number and base MAC address.
stoweA> show chassis
Identification:
Hostname UUID
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
stoweA 05d5b0fa ‐ f2fb ‐ 11dg ‐ 8daf ‐ af50d57e388e
Chassis:
Chassis Type Model Number Serial Number
‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐
ARX ‐ 2500 ARX2500LE ‐ F5 F5 ‐ ABCD ‐ 0505
Chassis Environment:
Base MAC Address Power Fan(setting) System Temp. CPU Temp. CPU
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
00:0a:49:75:5f:00 Online Online (high) Normal 32 C 45 C 2.6 GHz (Normal)
As a general rule, perform all replacements on the backup switch.
WARNING
Static electricity can damage switch components. Wear antistatic straps
before handling hardware modules and disk drives.
Replacing Optical Transceivers
Note
Before replacing optical transceivers, label any cables that need to be
removed.
You can hot-swap a 10 gigabit Ethernet optical transceiver in the
ARX-2500, but you must reboot the system after swapping out the
hardware.