F5 ARX-2500, Hardware Installation Manual

Page: 27 / 68

Determining Which Rail Kit to Use
ARX-2500 Hardware Installation Guide 2 - 5
The installation tasks differ for each platform, depending on the type of rack
mount you decide on or the type of cabinet you are installing into (single
two-post cabinet or four-post cabinet).
General Recommendations for Rack Mounting
Although not required, a 1U space between components makes it easier for
you to remove a component from the rack if that component requires
service. A 1U space between components also provides additional cable
routing options.
We recommend 100 mm spacing from the front panel to the rack front or
rack door. This provides enough room to route the cables without excessive
bending or insulation damage.
A shelf or similar device is required to support the unit if only one person is
installing the unit.
Important
To prevent personal injury or damage to the unit, it is recommended that at
least two people perform the installation.
Important
This product is sensitive to electrostatic discharge (ESD). Proper ESD
grounding procedures and equipment are recommended when you install or
maintain the unit.
Important
Do not power on until the management serial console or the management
network is connected to the unit.