![background image](http://html1.mh-extra.com/html/f-f-group/os-240-plus/os-240-plus_original-instructions-manual_3096620007.webp)
English | 7
www.ffgroup-tools.com
OS 240 PLUS
TROUBLE SHOOTING
PROBLEM
CAUSE
SOLUTION
Tool will not
start.
Power cord
not connected.
Check that the
power cord is
plugged in.
No power at
outlet.
If outlet is un-
powered, turn
off tool and
check circuit
breaker.
Internal dam-
age or wear.
Have techni
-
cian service
the tool.
Excessive
noise or
rattling.
Internal dam-
age or wear.
Have techni
-
cian service
the tool.
Sander not
sanding effec
-
tively.
Possible
sandpaper
problem.
Check sandpa-
per for wear
and or damage.
Possibly
wrong grit of
sandpaper.
Fine sandpaper
is graded in
large numbers
(100 to 600).
Coarse sand-
paper is small
numbers (36
to 80).
MODELS FITTED WITH DUST EXTRACTION FA-
CILITY
Always check that the suction hole are not obstruct-
ed when fitting the sanding sheet and that the per
-
forations in the sand sheet align with the holes in
the base.
CHIP OUTLET (PAGE 3)
An extraction hose (Ø 35 mm), can be attached on
the chip ejector. If desired, attach the dust box by
sliding the nozzle onto the chip extraction port.
For efficient operation, empty the dust box when
it is no more than half full, allowing better airflow
through the bag.
You can also connect your tool to a suitable dust ex-
traction system through the extraction port. Hose
adaptors (not included) may be needed depending
on the side of your dust hose.
MAINTENANCE
Regular inspection and cleaning reduces the neces-
sity for maintenance operations and will keep your
tool in good working condition. The motor must be
correctly ventilated during tool operation. For this
reason avoid blocking the air inlets.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste. Machine, accessories and pack-
aging should be sorted for environment -
friendly recycling. The plastic components
are labeled for categorized recycling.
EXPLANATION OF SYMBOLS
Double insulation
For indoor use only. Do not expose to
rain.
Wear eye protection.
Damage to lungs if an effective dust mask
is not worn.
Wear protective gloves
Damage to hearing if effective hearing
protection is not worn.
To reduce the risk of injury, the user must
read and understand this manual before
using this product.
Important!
Conforms to relevant safety standards
GUARANTEE
This product is warranted in accordance with the le-
gal/country specific regulations, effective from the
date of purchase by the first user. Damage attribut
-
able to normal wear and tear, overload or improper
handling will be excluded from the guarantee. In
case of a claim, please send the machine, complete-
ly assembled, to your dealer or the service Centre
for electric power tools.
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in conformity with the following stan-
dards or standardized documents: EN 60745-1, EN
60745-2-4, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3 in accordance with the provisions of
the directives 2006/42/EC, 2014/30/EU.
Technical File at:
FF GROUP TOOL INDUSTRIES S.A.,
19300, Aspropyrgos - Greece
Loudovikos Tsirigiotis
Operations & Engineering
FF GROUP TOOL INDUSTRIES S.A., 19300
Aspropyrgos - Greece. 19/01/2018
Summary of Contents for OS 240 PLUS
