10
User Manual
ECO 200
Operating
F+D
Feinwerk- und Drucktechnik GmbH
Kirchenstraße 38, D-69239 Neckarsteinach
Tel.: 06229 7000, Fax: 06229 70067
E-Mail: [email protected], Internet: http://www.fuddruck.de
3.1.2 Power- and Error-Display
Power-Display:
This display is green and lights up in case the mains switch of the printer is switched on.
Error-Display
This display is red and lights up or blinks in those cases the error-screen is active.
3.1.3 Keys
PRINT key
Of the actual label set one label will be printed.
FF key
Transports the paper through the printer without printing and synchronizes to print start.
MENU key
The menu-screen will be displayed. This gives the user the possibility to check the set printer functions or
change them respectively. The menu will be exited by depressing the same key again.
By depressing this key for a longer time period, that particular part of the menu can be skipped to, where the
last skip back took place.
During a print job, this can be stopped by depressing the key for a while, and depressing the key again
enables finishing the print job.
STATUS key
The status-screen will be displayed. In case of an error, this key (depress key 2x) displays the 2nd status-
screen with up to 8 error codes. The menu will be exited by depressing the same key again.
CUT key
Should a cutting device be available, this can be activated by depressing the Cut-key.
CLEAR key
Functions only when error-screen is opened. By means of CLEAR-key the displayed warning-message can
be erased. In case several errors are indicated at the same time, only the warning-message with the highest
priority at that time will be displayed. The CLEAR-key can only be depressed for that amount of time until all
warning-messages are displayed or erased respectively.
ERROR- and HARDWARE- messages cannot be erased.
