User Manual
ECO 200
Operating
F+D
Feinwerk- und Drucktechnik GmbH
Kirchenstraße 38, D-69239 Neckarsteinach
Tel.: 06229 7000, Fax: 06229 70067
E-Mail: [email protected], Internet: http://www.fuddruck.de
21
3.3.7 Character / LCD
Schedule
- ANSI
- ASCII
- multilingual
Country
- USA
- England
- Germany
- Denmark
- France
- Sweden
- Italy
- Spain
- Norway
- Netherlands
Update Flashdata
Here, logos and fonts can be store in the printer. The data is transferred
via serial or parallel interface.
For the conversion and implementation of logos the tool FDLogo can be
used. This is available on the homepage (www.FuDdruck.de).
1. Connect the printer via the parallel interface to the LPT-port of the PC.
2. Change to the menu CHARACTER/LCD / Update FlashData.
3. Activate the Update-mode by pressing the
l
- key.
4. In the display the following message will be shown
5. Data to be transmitted has to be prepared for the printer.
6. Activate the MS-DOS mode at the PC.
7. Now new data can be transmitted with the command line
copy/b file name lptx
Example: copy/b logos upd lpt1
<Enter>
via MS-DOS to the printer.
8. During the transmission process the message `....BUSY....´ will be displayed.
9. After successful transmission the printer states `....READY....´
10. The data is now firmly stored in the printer.
Scrolling
The menue text will be pushed in from aside
- no
- yes
Language
language to choose from menu CHARACTER / LCD
- german
- english
- french
* FLASH – DATA *
Send Data
CHARACTER / LCD
schedule
CHARACTER / LCD
country
CHARACTER / LCD
Update FlashData
CHARACTER / LCD
scrolling
CHARACTER / LCD
language
