PATHWAY HD Code Compliant Modular Access System Installation Manual
Page 70 of 92
5.11.5.
If ramps are guarded, first remove the 5/16”-18 x 2-1/4” hex bolt and 5/16” flat
washer attaching the guard top rail to the ramp frame post adjacent to the
platform angle post (FIG. 5.50). If ramps have two-line rails, 5/16”-18 x 2-1/4” hex
bolts, 5/16”-18 locknuts, and 5/16” flat washers are provided for bracket
attachment to the uppermost hole in the ramp frame post.
5.11.6.
For 48” wide ramps, attach the long leg of the ramp frame post support bracket
with the vertical slot to the ramp frame post using either the 5/16”-18 x 2-1/4” hex
bolt and 5/16” flat washer removed from the guard or a 5/16”-18 x 2-1/4” hex bolt,
5/16”-18 locknut, and 5/16” flat washers if installing a two-line rail (FIG. 5.50).
FIG. 5.50
