Room Scheduling System • Room Agent Installation and Configuration
16
Automatically Discover Panels
Automatically discover panels that are on the same subnet as the computer running the
Room Agent software as follows:
NOTE:
Any panels not on the same subnet as the computer running Room Agent must
be added using the
Manually
Add Panels pane (see “Manually Add Panels”).
1.
If Panel Management view is not currently displayed, click the
Panel
Management
tab.
2.
Click the
Discover
button above the
Auto
Discovered
Panels
,
1
on the previous page).
The
Discover
button becomes the
Stop
Discovery
button. Panels that are located
on the same subnet are automatically discovered and displayed (see figure 11).
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Figure 11.
Auto Discovered Panels Pane
NOTES:
•
TLS scheduling panels
ship with scheduling firmware installed. All except the
TLS 525M, TLS 725M, or TLS 1025M require firmware version 2.01.0010-b001
or higher to connect to them. TLS 525M, TLS 725M, or TLS 1025M requires
version 1.00.0004-b001.
•
TLP Pro touchpanels
ship with control firmware installed. Room Agent
requires that scheduling panels run different, scheduling, firmware, version
2.01.0010-b001 or higher to connect to them.
•
For either family of panel models
, if you receive the message
Cannot
connect
to
this
device
, click
OK
in the message dialog box,
STOP HERE
and update the panel firmware (see
on page 46, beginning
at step 5).
3.
When all of the panels are displayed, click the
Stop
Discovery
button to end the
search (see figure 11,
1
).
Manually Add Panels
Manually add panels that are on a different subnet than the computer running the Room
Agent software as follows:
1.
If Panel Management view is not currently displayed, click the
Panel
Management
tab.
2.
Click the
Add
New
button above the
Manually
Added
Panels
,
2
).
The
Add
New
Panel
dialog box opens (see figure 12).
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
Figure 12.
Add New Panel Dialog Box
