Configuration panel
A configuration file contains a snapshot (or record) of the relevant settings of the SMD 101.
The settings are divided into two files: box.cfg with general settings, and ip.cfg with the
network configuration. Multiple SMD 101 devices can be configured identically using the
same configuration file, saving setup time. Also, multiple configuration files can be saved
and used at different times in order to customize the SMD 101 for specific tasks. Configure
one SMD 101, then save the configuration file to a location that is accessible by each
SMD 101.
NOTE:
Channel presets can be saved independently using SIS commands (see
Save a configuration file to a computer as follows:
1.
Click the
Advanced
Configuration
tab above the navigation bar (see
2.
Click the
Firmware
Loader
icon on the navigation bar. The
Firmware
Loader
page
opens.
Current Firmware Version: 2.01.0000
Select a firmware file to upload:
Select a configuration file to upload:
Browse
Browse
Save
Upload
Cancel
Upload
Cancel
2
2
2
4
4
4
1
1
1
2
2
2
3
3
3
1
1
1
5
5
5
4
4
4
3
3
3
Figure 70.
Configuration Panel
3.
In the
Configuration
panel (see figure 70) click
Save
(
2
), then select
Box
Config
or
IP
Config
(see figure 71,
1
).
Figure 71.
Save Config File
•
Box Config
— Select this option to save all settings from both the
Configuration
and
Advanced
Configuration
pages.
•
IP Config
– Select this option to save only the connection settings on the
Advanced
Configuration
page.
SMD 101 • Web-based User Interface
75
Summary of Contents for SMD 101
Page 2: ......
